diygadget.com logo ic

Special: USD$8.99

Collapse  JP1 Simple Interface Kit

Parallel port JP1 kit to program your universal remote control.

This kit supplies you with all the parts needed to build your own JP1 cable. It is all you need (except a remote) to upload and download codes to your 6 pin enabled remote. In order to use the simple interface, your computer must have a parallel port. This port usually connects to old printer. If you have a laptop or your computer doesn't have a parallel port, you can purchase USB Kit.

This kit includes:
  • 4 feet of flat ribbon cable
  • DB25 Housing with Grommet, scews and wire holders
  • DB25 connector
  • 1.0k resistor X 2 (necessary for Kameleon and other remotes)
  • 1N5818 schottky diode works for both desktops and laptops
  • 6 pin female IDC connector to fit your remote (with strain relief)
  • 6 pin male header
  • Instructions (Click Here)
  • Download Driver (Click Here)

Click to enlarge image

Payment Options

Only $8.99

In Stock - Ship Next Day
DiyGadget Part No.: JP1-P01

Special: USD$25.99

Collapse  JP1 USB Interface Kit

USB JP1 kit to program your universal remote control.

This kit supplies you with all the parts needed to build your own USB JP1 cable. This is the version 2 of the USB interface which eliminates the potential problems found in the first version. If you don't have a parallel port or serial port, this is what you need! The USB Interface was designed to provide compatibility between any computer and any jp1 capable remote, eliminating all problems related to voltage mismatch, stuck reset, etc. It is all you need (except a remote) to upload and download codes to your 6 pin enabled remote.

This kit includes:
  • Flat ribbon cable
  • USB Cable to connect to your computer
  • Printed Circuit Board
  • Custom Programmed USB Chip
  • 10K Resistor X 3
  • 7.5K Resistor
  • 0.1MFD Monolythic Capacitor
  • 4.7MFD Tantalum Capacitor
  • 6MHz Ceramic Resonator
  • 6 pin female connector to fit your remote (with strain relief)
  • 6 pin male header
  • PCB housing box with screws
  • Instructions (Click Here)
  • Download Driver (Click Here)

Click to enlarge image

Payment Options

Only $25.99

In Stock - Ship Next Day
DiyGadget Part No.: JP1-U01

Special: USD$28.99

Collapse  JP1 USB Interface Kit 2 (Partially Assembled)

USB JP1 kit to program your universal remote control.

This partially assembled kit supplies you with all the parts needed to build your own USB JP1 cable. All resistors and components are pre-soldered onto the PCB. You only need to solder the cables. This is the version 2 of the USB interface which eliminates the potential problems found in the first version. If you don't have a parallel port or serial port, this is what you need! The USB Interface was designed to provide compatibility between any computer and any jp1 capable remote, eliminating all problems related to voltage mismatch, stuck reset, etc. It is all you need (except a remote) to upload and download codes to your 6 pin enabled remote.

This kit includes:
  • Flat ribbon cable
  • USB Cable to connect to your computer
  • Assembled Printed Circuit Board
  • Custom Programmed USB Chip
  • 6 pin female connector to fit your remote (with strain relief)
  • 6 pin male header
  • PCB housing box with screws
  • Instructions (Click Here)
  • Download Driver (Click Here)

Click to enlarge image

Payment Options

Only $28.99

In Stock - Ship Next Day
DiyGadget Part No.: JP1-U03

Special: USD$13.99

Collapse  JP1 Simple Cable

Parallel port JP1 cable to program your universal remote control.

The Standard JP1 cable is a simple interface built to the latest specifications. It is all you need (except a remote) to upload and download codes to your 6 pin enabled remote. It is professionally built from brand new parts and thoroughly tested prior to shipment. It is completed and no assembling is required.

Features:
  • 6 feet of standard flat ribbon cable
  • Parallel port connector is completely soldered
  • 1k resistors (necessary for Kameleon and other remotes)
  • 1N5818 schottky diode works for both desktops and laptops
  • 6 pin female connector to fit your remote
  • 6 pin male header
  • Instructions (Click Here)
  • Download Driver (Click Here)

Click to enlarge image

Payment Options

Only $13.99

In Stock - Ship Next Day
DiyGadget Part No.: JP1-P02

Special: USD$34.99

Collapse  JP1 USB Cable

USB JP1 cable to program your universal remote control.

The USB JP1 cable is another quality product built with a printed circuit board. This is the version 2 of the USB interface which eliminates the potential problems found in the first version. If you don't have a parallel port or serial port, this is what you need! The USB Interface was designed to provide compatibility between any computer and any jp1 capable remote, eliminating all problems related to voltage mismatch, stuck reset, etc. It is professionally built from brand new parts and thoroughly tested prior to shipment. It is completed and no assembling is required.

Features:
  • Total 6 feet of cable
  • Printed Circuit Board design
  • 6 pin female connector to fit your remote
  • 6 pin male header
  • Instructions (Click Here)
  • Download Driver (Click Here)

Click to enlarge image

Payment Options

Only $34.99

In Stock - Ship Next Day
DiyGadget Part No.: JP1-U02