This is a must have for your Liteon (Lite-on) DVD drive (83850V2 and 93450). This tool helps you to extract the DVD key without soldering.

This kit is designed to easy extract lite-on DVD key (83850V2 and 93450) without soldering.

You need our DVD power adapter to make it to work. This is for customer who already purchased the DVD power adapter or CK3 from us.

For 83850V2 and 93450, you will need to make 2 cuts on your liteon dvd PCB.


This kit comes with the following items:
* Include all the required components for your to extract dvd key (83850V2 and 93450) w/o soldering.
* Works with any PCs.
* Solderless - extract key in minutes


You also need a PCI to SATA controller card and XBOX 360 case opening tool in order to flash the DVD drive.

Note: You also need our DVD power adapter in order to use this kit. Other brands of DVD power adapter won't work because they do NOT have required connection on the adapter.

This product is perfect if you plan on hooking up your dvd to your pc and do some interesting testing.


Warnings

In order to connect the Xbox 360 DVD to your PC, you have to open Xbox 360 DVD case, which invalidates your warranty. If you want to keep you warranry, do not try this.

We are NOT responsible for any misreading or damage done to your Microsoft XBox 360 / computer in any way.

The complete tutorial is published at http://www.tiaowiki.com/w/Game_Adapter_Tutorials


Warning

We strongly encourage you to use multimeter to check the trace after rejoin it using silver glue (when it is dried). Fail to do that, you may damage your DVD drive.

If you are not too afraid of soldering, you can also solder the cuts, however, you still need to use multimeter to check the joint, to make sure there is no short circuit.

You are responsible for any damage you cause to your device. We are not liable for any damages you cause to your device.