X 360 Liteon Solder Kit - Liteon Switch 2.0 (8/9)

This is a must have for your Liteon (Lite-on) DVD drive (83850V2 and 93450).

You need our DVD power adapter to make it to work. This is for customer who already purchased the DVD power adapter or CK3 from us.

You also need a PCI to SATA controller card and case opening tool in order to flash the DVD drive.

Note: You also need our DVD power adapter in order to use this kit. Other brands of DVD power adapter won't work because they do NOT have required connection on the adapter.

This product is perfect if you plan on hooking up your dvd to your pc and do some development.


Warnings

In order to connect the DVD to your PC, you have to open the case, which invalidates your warranty. If you want to keep you warranty, do not try this.

We are NOT responsible for any misreading or damage done to your device / computer in any way.


Warning

We strongly encourage you to use multimeter to check the trace after rejoin it using silver glue (when it is dried). Fail to do that, you may damage your DVD drive.

If you are not too afraid of soldering, you can also solder the cuts, however, you still need to use multimeter to check the joint, to make sure there is no short circuit.

You are responsible for any damage you cause to your device. We are not liable for any damages you cause to your device.