Black Flash USB+ Universal Memory Programmer with Integrated USB to COM(TTL) and Two Port USB 2.0 Hub

Product Code: BLACKFLASH
Availability: In Stock

Compatible with FlashcatUSB, this device can program all CFI compatible flash devices over JTAG and can also program SPI high-density serial flash devices.

Hardware support can be added using a easy to use device script feature.

  • Flash cat USB 3.0.5/3.0.2
  • Universal CFI Flash programming support 2 DIP switches for mode application changes
  • Upgradeable firmware over USB
  • On board reset button
  • SPI Mode 0, 1, 2 compatible
  • Dual voltage (3.3v or 5v) output
  • USB to Serial (TTL) converter
  • USB 2.0 Hub (Two Ports)
  • Black Flash USB+ Universal Memory Programmer
  • 80 Pin dual row IDC header (2.54mm spacing)
  • 8 PCS female to female jumper wire (20 cm)
  • Open source software supports Windows 2000, 2003, XP, Vista and Win7/10 (32-bit and 64-bit versions)
  • Current support and compatibility JTAG MODE (AVR 7.04) CFI compatible memory
  • Intel, AMD, and SST programming modes supported
  • DRAM compatible memory
  • Real-time reading and writing supported
  • SPI compatible memory
  • Broadcom and Atheros chipsets
  • DMA Mode100KB/S read and up to 50KBs write PrAcc Mode (non-dma)
  • Full support for high (yet slow) compatibility
  • MIPS Support (EJTAG)Version 1.x, 2.0, 2.5, 2.6 and 3.1 supported XILINX Support
  • Supports both SVF and XSVF file formats ARM Support
  • ARM7 and ARM9 support coming soon
  • SPI MODE (AVR 3.04) SPI mode 0, 1, 2 compatible
  • High Density (1 to 128 mbit)
  • Supports 16 and 24 bit addressing Ultra High Density (256Mb+)
  • Supports 32 bit addressing High-Speed (8 MHz FOSC/2)Up to 400KB/s read and 300KB/s write
  • 3.3 voltage output

Download driver

Write a review

Note: HTML is not translated!
    Bad           Good