Universal JTAG Adapter V2 - Wiggler and Xilinx Platform Cable Compatible (Debrick routers/modems and more)

Product Code: UJTAG
Availability: In Stock

This is the Version 2 of our popular Parallel Port Universal JTAG adapter, with additional features

No parallel port? We have USB version of the board available!

Check it out here Ever wondered why there are many different JTAG adapters in the market? They often are not compatible because of the software. This means you would need to buy many JTAGs. a JTAG for your wireless router, a JTAG for your SB5100 modem, a JTAG for FTA, a JTAG adapter for your XBOX 360 or a JTAG to program your Xilinx CPLD.

Now we are offering the most flexible JTAG adapter in the world! With the easy configuration cable, you can make it work for any application!

This universal JTAG adapter Version 2 works with any applications, it can be used as buffered JTAG or unbuffered JTAG.

What new in V2?

Compare to V1, the Version 2 has the following additional features or improvements:

  • Jumper to enable Xilinx Platform Cable mode. In V1, you need to short DB25's PIN 8, 11 and 12 (using a solder iron), in V2, all you need to do is to move jumpers to different positions.
  • Onboard NPN transistor, so you can invert any signal as needed (e.g. nSRST). You can config it to be a Wiggler JTAG, or a Xilinx Platform Cable, or any parallel JTAG interface!

You can use this to debrick your wireless router, such as WRT54/WRT54G/WRT54GL etc, you can use this JTAG on your SB5100 to install customized firmware, you can use this JTAG to fix your FTA's GLS (Green Light Syndrome) , you can use it on XBOX 360, you can also config it as a Xilinx Parallel Cable III so you can program CPLD in iMPACT, just name it!

For detailed configuration steps, please visit our tutorial page at http://www.tiaowiki.com to program Xilinx CPLD.

The package comes with: 

  • Universal JTAG adapter board Version 2
  • 8 color-coded female to female flex breadboard cable (19 inch / 50 cm each)
  • 8 color-coded female to female flex breadboardd cable (4 inch / 10 cm each)
  • One 80 PIN (2 by 40) IDC header

Supported wireless routers:

Linksys WRT54G Linksys WRT54G2 Router Linksys WRT54GS Router Linksys WRT54GL Router Linksys WRT54G-TM Router Linksys WRH54G Router Linksys WRT150N Router Linksys WRT300N v1.0 Router Linksys WRT310N Router Linksys WRT350N Router Linksys WAP54G (Jtag port) Router Motorola WR850G v2 v3 Router Buffalo WHR-G54 Router Buffalo WHR-G54S Router Buffalo WHR-G125 Router Buffalo WHR-HP-G54 Router Buffalo WBR-G54 Router Buffalo WBR2-G54 Router Buffalo WBR2-G54S Router Buffalo WZR-HP-G54 Router Buffalo WZR-RS-G54 Router Microsoft MN-700 Router Dell TrueMobile 2300 v2 Router And Many More!

Supported cable modems:

MOTOROLA Surfboard SB5100 MOTOROLA Surfboard SB5101 MOTOROLA Surfboard SB4200 MOTOROLA Surfboard SB4100 (I) (E) versions RCA DCM315 Cable Modems and many more! Supported Free to Air satellite receivers: Ariza, Blackbird, Silver Bullet, Fortec, Digiwave, coolsat, ST-1000/ST-2000, SN-1000, BOBs, Lifetime Ultra, Pansat 2300, 2500A, 2700A, Pansat 3500S, Pansat 3500SD and many more!

Write a review

Note: HTML is not translated!
    Bad           Good